VERSATEX FINISHING SYSTEM
We complete the project with our VERSATEX Finishing System which provides our builders with adhesives, sealants and a nail-hole filler that is specifically designed to work with our products. All products maintain top UV resistance and are a close match to the color of our products. The VERSATEX Fill n’ Fasten can be used to fill nail or screw holes if you are considering leaving VERSATEX unpainted. It also works equally well as a structural adhesive for gluing joints or laminating sheets and boards.
Approximate set times for Weld-On #705 3-5 minutes.
Fill n’ Fasten Fast Cure (Green Label) working time 4-6 minutes.
Fill n’ Fasten Laminate Grade (Yellow Label) working time 10-20 minutes.
Fill n’ Fasten Slow Cure (Red Label) working time 15-25 minutes. (Do not use Slow Cure below 40°F)
| Finishing System | ||||
|---|---|---|---|---|
| Weld-On #705 White | 16oz | 32oz | 128oz | |
| Weld-On #705 Clear | 4oz | 8oz | ||
| Fill n’ Fasten (Available in slow, fast and laminating grade) | 220 ML Tubes | 400 ML Tubes | ||





