Loading
INSTALLING VERSATEX
Moulding
Standard wood working machinery is acceptable with speeds of 8,000 RPM’s or greater (the higher the RPM’s, the smoother the surface). Feed rates of 30-50 feet per minute yields best results.
Tip:Sharp tooling made of carbide or high speed steel, hold down clamps and optimum dust collection will produce a premium finish.
Milling (CNC)
Use a single edge up cut spiral bit at a chip load of 0.016” to 0.018”. Run tools at 14,000 RPM’s and feed speeds between 20 to 25 FPM.
